Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Current »

The Coordinator Utility Port is used for the communication between the Coordinator and the connected Initiator and Helper Agents. Using this port, the Coordinator receives information from the Agents about their machines. This information includes, among others: IP address, hostname, operating system, number of cores, CPU, memory, and the availability of the machine.

The Coordinator Utility Port must be the same in all the machines that participate in IncrediBuild Environment. If you change it in one place, you must manually change it in all other machines. Changing the Coordinator Utility Port in the Coordinator Settings dialog box, will NOT change this port in the Agents as well. You will need to manually change this port in all the machines in the Environment.

The default port of the Coordinator Utility Port is: 9953.

Note: The default port of the Coordinator Utility Port can also be changed during the installation, using the -N <port> command. 

To change the default port of the Coordinator Utility Port using the Management Console, perform the following:

  1. Change the default port of the Coordinator Utility Port in the Settings of the Coordinator Console.
  2. Change the default port of the Coordinator Utility Port in the Settings of the Agent Console of each connected Agent.


Step 1 - Changing the Default Port of the Coordinator Utility Port in the Coordinator Settings

> To change the default port of the Coordinator Utility Port in the Coordinator Settings:

  1. Open the Management Console of the Coordinator, by opening the browser and entering the following address:
    http://<IP address of the Coordinator machine>:8080/incredibuild/

  2. On the Management Console, click the Coordinator Monitor tab. Then, click the Coordinator Settings button to open the Coordinator Settings dialog box:


  3. On the Coordinator Settings dialog box, open the Network tab. Then, in the Coordinator Utility Port field enter a different port number:


  4. Click the Update Settings button to save and apply your new port. Then, click Close.

You now have to change this port on all the Agent machines that participate in IncrediBuild Environment, as described in Step 2 below.


Step 2 - Changing the Default Port of the Coordinator Utility Port in the Agent Settings

Change the default port of the Coordinator Utility Port in the Settings of each connected Agent, according to the port number you entered in the Coordinator Settings.

> To change the default port of the Coordinator Utility Port in the Agent Settings:

  1. Open the Management Console of the Agent, by opening the browser and entering the following address:
    http://<IP address of the Agent machine>:8080/incredibuild/

  2. On the Management Console, click the Agent Settings button to open the Agent Settings dialog box:


  3. On the Agent Settings dialog box, open the Network tab. Then, in the Coordinator Utility Port field enter the new port number you previously entered in the Coordinator Settings:


  4. Click the Update Settings button to save and apply your new port number. Then, click Close.

  5. Repeat this procedure in all the machines that host Agents that participate in IncrediBuild Environment, and enter the same port number in each of them.



  • No labels