...
The following table lists the optional installation parameters for IncrediBuild Linux:
Note: Some of the optional parameters have default values. If you do not enter a different value for these parameters, the default values will take effect.
...
- By default, the communication between the Coordinator and the Agents is done using IPv4.
- After the installation, this parameter can be changed in the Coordinator Management Console > Coordinator Settings dialog box. The last entered value will take effect.
...
For an Agent installation - skips the automatic Agent-Coordinator connectivity test.
...
- By default, once a Helper/Initiator Agent is installed on a remote machine, its connection to the Coordinator is tested automatically. If you do not want to test this connection at the Agent installation stage, add this parameter to the installation command.
- The connectivity test is important for verifying that the Coordinator-Agent communication works properly. Therefore, use this parameter carefully, and remember to test the Coordinator-Agent connectivity at a later stage.
...
- String.
- The default value is 8080.
- This port can be changed after the installation as well. For more information, see Webserver Ports: Coordinator and Agents – Web Management Console Connection.
...
- String.
- The default value is 9953.
- This port can be changed after the installation as well. For more information, see Coordinator Utility Port: Coordinator – Agents Connection.
...
- String.
- The default value is 11 GB.
- It is not recommended to allocate less than 5 GB.
...
| width | 15 |
|---|
...
| align | left |
|---|
Installation Commands:
| Child pages (Children Display) | ||||
|---|---|---|---|---|
|
IncrediBuild for Linux Guide:
...
