Accelerating 加速 C# Applications应用程序IncrediBuild can accelerate C# applications, provided that many projects in the C# solution are independent of each other. IncrediBuild will run each project on a core of a machine, so that if for example, there are hundreds of projects in a solution, IncrediBuild will be able to use hundreds of cores in parallel to accelerate the build of the entire solution.A C# extension package is required on the machine that initiates the build, in order to accelerate IncrediBuild using C Sharp. In addition, settings must be configured in order to use C#, as described in the following procedure. To configure settings for use of C#: On the machine that initiates the build, open the registry and browse to: HKEY可以加速 C# 应用程序，前提是 C# Solution中的众多项目彼此独立。 IncrediBuild 运行每个项目将使用一台计算机上的内核，因此，举例来说，如果Solution中有数百个项目，IncrediBuild 将能够并行使用数百个内核来加速整个Solution的构建。 启动构建的计算机上必须有 C# 扩展包，以便使用 C Sharp 加速 IncrediBuild。 此外，您必须按照以下所述过程配置设置才能使用 C#。 配置使用 C# 的设置： - 在启动构建的计算机上，打开注册表并浏览到：HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Xoreax\IncrediBuild\Builder.
Under this key, locate or create the "UseMsBuild" string value and set it to 1. Note: In VS 2010, additional settings are required in order for C# to work.- 在此注册表项下，找到或创建“UseMsBuild”字符串值并将其设置为“1”。
注意: - 在 VS 2010 中还需要其他设置才能使 C# 正常工作。
|